All parts available from:
97 San Benancio Cyn Rd
Salinas CA 93908
831-484-1921 M-F 9-5pm Pacific
E-Mail|
Shipped same day when ordered by 1pm Pacific |
 |
|
and are not intended for use on pollution controlled street vehicles |
| You
asked for it...you got it! Front Fork Pre-Load Adjuster This will stiffen up the front end |
  |
  |
Check the
left side fork to see if adjuster is in there. If you have
installed the "right fork spring kit" that we offer, you
should get this! Approximately 25mm (1 inch) of adjustment. 8mm wrench will be needed for installation
|
| Right
Fork Spring Kit
No more front end dive! (Did you know that the YSR came from the factory with only one fork spring, and a top clamp that does not clamp? Amazing, eh?) Kit contains progressively wound spring, spacer, complete instructions. |
 |
|
Billet Aluminum Top Clamp CNC Machined Superb Quality since1987 Top Clamp can be used with the stock key switch, yet actually clamps to the fork tubes unlike the O.E.M. (It is a must if using clip ons.) Not Available at this time |
  |
|
|
Right Fork Spring Kit No more front end dive! (Did you know that the YSR came from the factory with only one fork spring, and a top clamp that does not clamp? Amazing, eh?) Kit contains progressively wound spring, spacer, complete instructions. |
|
Billet Aluminum Fork Brace CNC Machined Superb Quality since 1987 Not Available at this time |
  |
 |
Fork Brace really makes the front end of the YSR stick the way it should! The fork brace eliminates the braking torque that contributes to the flex of the front end. A definite plus for hard cornering. GUARANTEED no stiction if installed properly and forks and T-stem are straight! |
|
Billet Aluminum Wheel Spacer CNC Machined Superb Quality since 1987 This takes the place of the speedo drive gear on the left front fork. Wheel spacer significantly reduces drag. A must for racing! NO LONGER AVAILABLE N |
  |
 |
The O.E.M. speedo drive is notorious for drag. If you are racing--replace it! Cheap Horsepower! |
|
Billet Aluminum Brake Stay Arm CNC Machined Same Superb Quality since 1987 |
 |
 |
The Billet Brake Stay Arm is Stronger and Lighter |
Replaceable Bar Clip ons
|
  |
 |
Master Cylinder Cover Billet Aluminum Seals better....Looks Great! |
|
Major Front Suspension Breakthrough for your YSR! Front fork re-valving with compression and REBOUND! No more mid-corner jacking up and down, no more front fork chatter under hard braking. Send us your front forks complete, including fork caps and springs. (if you don't have a front fork spring kit installed already, it will be necessary) Turn around time is 24 hours! The forks will be returned to you ready to go. Modification includes new fork seals and fork oil. Just slide them back onto your YSR and enjoy! Call! |
 |
(complete instructions, with pictures, on how to change these yourself are on the Tech Tips Page) |
Fork Seals |
|
Fork Wipers Easy to change!
Fork Oil |
  |
  |
 |
|
|
 |
 |
Team Calamari has most of the common original manufacturer parts in stock for: YSR, NSR, ZUMA, DERBI If it has to be ordered-we get it quick! |
| Products Index | Index |
| Products 1 | Top Clamp, Front Fork Revalving, Spring Kit, Clip Ons, Wheel Spacer, Brake Stay Arm, Billet Alum Master Cylinder Cap |
| Products 2 | Exhaust, Exhaust stubs, Rear Shock, Temperature Guage, Carbon Fiber Dash |
| Products 3 | Tires, Wheel Bearings,
Brakes, Steel Braided Brake Line Kit, Billet Master Cylinder
Cap, Speedometer Cable, Shift Lever |
| Products 4 | Swingarm Bushings, Swing Arm Brace, Tapered Timpkin Steering Bearings |
| Products 5 | Carburetors, Air Cleaners, Jet Kits, Airbox Mods, 1/4 turn Throttle, Carb Cables, Reeds, Reed Stops, Oil Block Off Plate, Gas Cap Cover, Gas Cap Screws, Fuel Petcock |
| Products 6 | Hot Wire, Clutch, Rod Kit, Main Bearings, Seals, Gaskets, Bolt Kit, Cable luber, Battery |
| Products 7 | Body Work - Stock Replica & Body Work Harware |
| Products 8 | Body Work - Flush Mount Turn Signals, Turn Signal Flasher |
| Products 9 | Body Work - Dual Headlight - GSXR Seat |
| Products 10 | Body Work - Body work bolt kit, Carbon Fiber License Plate Frame |
| Products 11 | Body Work - Windscreens, Windscreen Bolts |
| Products 12 | Swingarm Bike Stand, T-Shirts, Hats, Service Manuals |
| Products 13 | Honda NSR50 and NS50F |
| Products 14 | Derbi Parts |
| Products 15 | Tools |
| Products 16 | ZUMA |
| Products 17 | Engine Work |
Team Calamari Race Results 1995 - 2004
Our products at work!
Calamari Home!