E-Mail|
Shipped same day when ordered by 1pm Pacific |
 |
|
and are not intended for use on pollution controlled street vehicles |
|
|
 |
 |
Derbi Stock Peg Bushings Billet aluminum Quick and Easy Installation
|
|
These Pix show why the bushings are needed. The Stock Pegs are rubber mounted and under hard cornering scrape the swing arm.
The answer to the suspension upset when cornering ! |
  |
 |
High Performance Exhaust Lets Your GPR rev ! |
|
Fits Better than stock! (shown without the lower so you can see the fit. The pipe does not interfere with the lower.) Great ground clearance Tucked in way good |
 |
|
|
High Performance Carburetor Kit Bolts right on! (Cannot use oil pump, which is a good thing. Pre-mix is the only way to go!) Instant Horsepower |
|
You can just see the air cleaner, also good view of how tucked in the pipe is. Pipe and Carb Kit really brings to life the Derbi GPR50. |
|
|
|
Carbon Fiber Oil Pump Block Off Plate |
|
Nology Hot Wire If you're not using a Hot wire.....you're not going as fast as you could! Inexpensive Horsepower |
 |
 |
Carbon Fiber Reeds Easy Installation Instant Horsepower |
|
Got Spark??? This is the easy way to find out! In seconds (and safely) you know the quality of your spark, or if there is any! Inexpensive and indespensible! |
|
|
|
Water Temp Guage Replace that useless stock guage! Digital Accuracy! Is also a clock-Waterproof, back lit for night riding-Easy installation |
| Ferodo Front and Rear Brake Pads |
 |
 |
Sprockets! Front and rear sprockets in stock Rear Aluminum sprocket weighs less than HALF of the stock steel sprocket |
|
High Performance Tires Street or Track D.O.T. Rain Slicks These are killer tires for the NS50F, Derbi Gpr, Derbi Super Motard,or Aprillia RS50 Great for street (dot Approved) or track Optimum Size for superb handling, not to mention sticky! We Also carry Dunlop Slicks for racing |
  |
 |
CD contains: GPR Service Manual & Parts Manual Motard Service Manual & Parts Manual Tech tips |
|
Rear Stand for the GPR Racing, or working on your GPR....the stand makes it easy! |
 |
 |
Fly Wheel Puller |
 |
Team Calamari has most of the common original manufacturer parts in stock for: YSR, NSR, ZUMA, DERBI If it has to be ordered-we get it quick! |
| Products Index | Index |
| Products 1 | Top Clamp, Fork Brace, Spring Kit, Front Fork Re-Valving,Clip Ons, Wheel Spacer, Rear Brake Stay Arm, Set Backs, Foot Pegs |
| Products 2 | Exhaust, Exhaust stubs, Rear Shock, Temperature Guage, Carbon Fiber Dash |
| Products 3 | Tires - Brakes - Steel Braided Brake Line Kit, Billet Aluminum Master Cylinder Cap |
| Products 4 | Swingarm Bushings, Swing Arm Brace, Tapered Timpkin Steering Bearings |
| Products 5 | Carburetors, Air Cleaners, Jet Kits, Airbox Mods, 1/4 turn Throttle, Carb Cables, Reeds, Reed Stops, Oil Block Off Plate, Gas Cap, Gas Cap Cover |
| Products 6 | Nology Hot Wire, Clutch, Hi Performance Ignition, Bolt Kit, Cable luber, Safety wire, Misc Tools, Works Stand |
| Products 7 | Body Work - Stock Replica & Body Work Harware |
| Products 8 | Body Work - Flush Mount Turn Signals, Turn Signal Flasher |
| Products 9 | Body Work - Dual Headlight - GSXR Seat |
| Products 10 | Body Work - Front Fender |
| Products 11 | Body Work - "Works Replica", Windscreens |
| Products 12 | Swingarm Bike Stand, T-Shirts, Hats, Service Manuals |
| Products 13 | Honda NSR50 and NS50F |
| Products 14 | Derbi Parts |
| Products 15 | Derbi Body Work |
| Products 16 | ZUMA |
| Products 17 | Engine Work |
 |
 |
